Rook can be installed on any existing Kubernetes cluster as long as it meets the minimum version and Rook is granted the required privileges (see below for more information).
Kubernetes v1.16 or higher is supported for the Ceph operator.
In order to configure the Ceph storage cluster, at least one of these local storage options are required:
- Raw devices (no partitions or formatted filesystems)
- Raw partitions (no formatted filesystem)
- PVs available from a storage class in
You can confirm whether your partitions or devices are formatted with filesystems with the following command.
NAME FSTYPE LABEL UUID MOUNTPOINT vda └─vda1 LVM2_member >eSO50t-GkUV-YKTH-WsGq-hNJY-eKNf-3i07IB ├─ubuntu--vg-root ext4 c2366f76-6e21-4f10-a8f3-6776212e2fe4 / └─ubuntu--vg-swap_1 swap 9492a3dc-ad75-47cd-9596-678e8cf17ff9 [SWAP] vdb
FSTYPE field is not empty, there is a filesystem on top of the corresponding device. In this example, you can use
vdb for Ceph and can’t use
vda or its partitions.
Ceph OSDs have a dependency on LVM in the following scenarios:
- OSDs are created on raw devices or partitions
- If encryption is enabled (
encryptedDevice: truein the cluster CR)
metadatadevice is specified
LVM is not required for OSDs in these scenarios:
- Creating OSDs on PVCs using the
If LVM is required for your scenario, LVM needs to be available on the hosts where OSDs will be running.
Some Linux distributions do not ship with the
lvm2 package. This package is required on all storage nodes in your k8s cluster to run Ceph OSDs.
Without this package even though Rook will be able to successfully create the Ceph OSDs, when a node is rebooted the OSD pods
running on the restarted node will fail to start. Please install LVM using your Linux distribution’s package manager. For example:
sudo yum install -y lvm2
sudo apt-get install -y lvm2
- Since version 1.5.0 LVM is supported
- Logical volumes will not be activated during the boot process. You need to add an runcmd command for that.
runcmd: - [ vgchange, -ay ]
Ceph requires a Linux kernel built with the RBD module. Many Linux distributions have this module, but not all distributions. For example, the GKE Container-Optimised OS (COS) does not have RBD.
You can test your Kubernetes nodes by running
If it says ‘not found’, you may have to rebuild your kernel
or choose a different Linux distribution.
If you will be creating volumes from a Ceph shared file system (CephFS), the recommended minimum kernel version is 4.17. If you have a kernel version less than 4.17, the requested PVC sizes will not be enforced. Storage quotas will only be enforced on newer kernels.